Controller Failure Alarm

acBoardControllerFailureAlarm

Alarm

acBoardControllerFailureAlarm

OID

1.3.6.1.4.1.5003.9.10.1.21.2.0.9

Description

The alarm is sent in the following scenarios:

■ For Mediant 500L, Mediant 800, and Mediant 1000: Physical FXO port is up or down (Out-of-Service or OOS). The FXO line can be down due to, for example, port disconnected or insufficient current and voltage. (Syslog message event is ANALOG_IF_LINE_DISCONNECTED.)
■ Physical BRI or PRI (E1/T1) port is up or down (OOS).
■ Proxy is not found or registration fails. In such a case, the device's routing table may be used for routing instead of the Proxy.
■ Connection to the Proxy is up or down.
■ Failure in TDM-over-IP call - transparent E1/T1 without signalling.
■ Connection to the Proxy Set associated with the trunk/line is up/down.
■ Failure in server registration for the trunk/line.
■ Failure in a Serving IP Group for the trunk.
■ Failure in a Proxy Set.

Default Severity

Major

Event Type

processingErrorAlarm

Probable Cause

softwareError (46)

Severity

Condition

Text

Additional Information

Major

Failure in a Proxy Set

"Proxy Set ID n"

Where n represents the Proxy Set ID.

 

Proxy has not been found or registration failure

"Proxy not found. Use internal routing"
-OR-
"Proxy lost. Looking for another Proxy"
■ Check the network layer
■ Make sure that the proxy IP and port are configured correctly.

Connection to Proxy is down

"BusyOut Trunk/Line n Connectivity Proxy failure"

-

Connection to the Proxy Set associated with the trunk or line is down

"BusyOut Trunk/Line n Proxy Set Failure"

Where n represents the BRI / PRI trunk or FXO line.

-

Failure in TDM-over-IP call

"BusyOut Trunk n TDM over IP failure (Active calls x Min y)"

Where n represents the the BRI / PRI trunk.

-

Failure in server registration for the trunk/line

"BusyOut Trunk/Line n Registration Failure"

Where n represents the BRI / PRI trunk or FXO line.

-

Failure in a Serving IP Group for the trunk

"BusyOut Trunk n Serving IP Group Failure"

Where n represents the BRI / PRI trunk ID.

-

 

FXO physical port is down

"BusyOut Line n Link failure"

Where n represents the FXO port number (0 for the first port).

Verify that the FXO line is securely cabled to the device's FXO port.

 

BRI or PRI physical port is down

"BusyOut Trunk n Link failure"

Where n represents the BRI / PRI trunk port number (0 for the first port).

Verify that the digital trunk is securely cabled to the device's digital port.

Cleared

Proxy is found. The 'Cleared' message includes the IP address of this Proxy.

-

-